| This document was generated by C-spec WeldOffice® Software. © Copyright 2005 C-spec. All rights reserved worldwide. | |||
 |
C-spec Welding Procedure Qualification Record
PO Box 27604 Concord, California 94527
ASME IX Procedure Qualification Record (PQR) - Test results (as welded)
C-spec WeldOffice Software
|
| PQR record number | PQR-100 | Revision | 0 | WPS record number | P1-AT-Lh-CVN | Revision | 0 |
| Date | 9/14/00 | Company name | C-spec Welding Procedure Qualification Record Software | ||||
TENSILE TESTS (QW-150)
| Specimen number | Width (in.) |
Thickness (in.) |
Area (in˛) |
Ultimate total load (lb) |
Ultimate unit stress (psi) |
Type of failure and location |
| T11 | 0.749 | 0.751 | 0.562 | 35620 | 63500 | Ductile-BM(Gr60) |
| T12 | 0.750 | 0.748 | 0.561 | 34530 | 61500 | Ductile-BM(Gr60) |
| T21 | 0.748 | 0.749 | 0.560 | 33890 | 60500 | Ductile-BM(Gr60) |
| T22 | 0.752 | 0.751 | 0.565 | 35900 | 63500 | Ductile-BM(Gr60) |
| Comments | 2 reduced section tension tests per QW-151.1 and QW-462.1(a) |
GUIDED BEND TESTS (QW-160)
| Type of test | Acceptance criteria | Result | Comments |
| 4 transverse side bends per QW-161.1 and QW-462.2 | QW-163 | Acceptable | see - ASME IX - QW-451.1 |
| Comments |
TOUGHNESS TESTS (QW-170)
| Specimen number |
Notch location | Notch type | Specimen size (in.)*(in.) |
Test temperature (°F) |
(ft lb) |
Impact values (% Shear) |
(Mils) |
Drop weight break |
| B60-1 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B60-2 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B60-3 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B60-4 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B60-5 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H60-1 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H60-2 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H60-3 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H60-4 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H60-5 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| W-1 | Weld Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| W-2 | Weld Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| W-3 | Weld Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| W-4 | Weld Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| W-5 | Weld Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H70-1 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H70-2 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H70-3 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H70-4 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| H70-5 | HAZ | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B70-1 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B70-2 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B70-3 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B70-4 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| B70-5 | Base Metal | V-notch | 0.394 x 0.394 | -40 | 152 | 45 | 40 | - |
| Comments | Standard 10x10 mm specimens. |
CERTIFICATION
| Welders name | ID number | Stamp number | Mechanical testing by | Testing Lab Inc. |
| Elder Z.W. | 555-55-5555 | ZWE-01 | Laboratory test number | TLI-0009 |
| Test file number | PQRD-200 | |||
| Tests conducted by | C-spec Welding Procedure Qualification Record Software Test Lab |
We certify that the statements in this record are correct and that the test welds were prepared, welded and tested in accordance with the requirements of Section IX of the ASME Code.
|
Welding Engineer
|
QA Manager
|